.
|
|
TO REMOVE RESIDUE BUILD-UP IN YOUR PLUMBING SYSTEM. |
EZ FLUSH IS THE FIRST PRODUCT THAT SHOULD BE USED IN THE SPA KIT. IT IS ONLY USED ONCE DURING THE KIT’S ENTIRE 3-MONTH USAGE PERIOD.
DIRECTION FOR USE
- Pour the entire contents of EZ Flush into the hot tub water to dislodge accumulated debris from the pipes.
- Run the pump(s) for three cycles. During this time, rinse the filter cartridge(s).
- Completely drain all water from the spa.
- Refill the hot tub and adjust the pH to 7.2 (slightly orange on pad), and total alkalinity to 120 ppm (medium green on pad) using water test strips.
>> Go to Step 2 | ![]() |